ACO FastForm
|
FastForm is a unique trench forming system for cast-in-place applications. FastForm is manufactured from reinforced 2-ply cardboard. Each former is a complete kit that produces a strong, lightweight ‘V’ shaped form. The assembly also positions and supports the steel frames for grates. Unlike expanded polystyrene forming systems, which are difficult to dispose of after use due to environmental issues, FastForm can be easily disposed of after removal. FastForm is flat packed, giving significant cost savings on freight.
Typical applications
- Loading docks
- Airports
- Gas stations
- Industrial areas
- Commercial areas
- Ports & docks
|
| |
|
FastForm - Features
1) Plywood prevents reinforcement from moving during concrete pour.
2) Cross brace keeps formers square at all times and aids alignment.
3) Nails - part of assembly kit used to hold form pieces together.
4) Sloped (1.0%) formers - neutral formers in four depths and catch basins provide a complete trench drainage system. FastForm comes in 8ft sections.
5) Installation instructions are printed on every 4ft lid.
6) 2-ply reinforced cardboard provides a strong forming body that is easy to dispose of after use.
7)Choice of grates - Class C galvanized bar grate or Class E ductile iron grate.
8) Bolted grates - all grates are lockable with two 1/2 - 13 x 13/4” bolts fixing directly into the steel frame.
9) Black coated or galvanized steel frame provides grate seat and locking points.
10) Installation brackets provide simple and easy installation using No. 4 or 5 rebar.
11) Inlet/outlet pipes can be created by positioning PVC pipe directly against the former prior to pouring concrete. Secure pipe in place to avoid movement.
12) FF300 12” internal width - trench system. (2ft section of former shown).
13) Nelson studs attached to the frame act as
concrete anchors to secure frame into concrete surround.
14) Direction arrows on the sides of the former indicate flow direction and ensure formers are installed correctly.
15) ‘Roll-up’ reinforces ‘V’ shape of trench.
16) Internal reinforcement ‘Inner cell’ holds former square during installation and concrete pour.
17) FF600 24” internal width - trench system. (4ft section of former shown). |
zurn
